Ender-2 Low Profile Control Box

Parts required:
==============
* 10x M3 6mm screws
* 2x M3 14-16mm screws (You should be able to use two of the ones used to hold the old case in place)

Designed this after fighting to get my large hand under the bed to adjust for leveling. Reduces the height of the casing by 18mm.

Use the existing case mount screws to mount the housing to the base. Use the two 14-16mm screws to mount the fan to the bottom of the cowling, taking your time to avoid splitting the print as it threads in. All other mounts use the M3 6mm to thread into the plastic including the LCD board. It's recommended to assemble the whole unit before mounting it to the printer.