Thingiverse
Ender 3 bed level test
di Spaz069
171
Download
97
Likes
0
Makes
Ender 3 bed level test
1 Print 0.20mm test.stl at 0.20mm layer height with 0.4mm nozzle.
2 After print is done inspect print, see that pla is making good contact with bed.
3 Remove from bed measure print height with vernier.(should be 0.2mm)
Use 0.20mm layer height with 0.20mm test.stl
Use 0.25mm layer height with 0.25mm test.stl
Use 0.30mm layer height with 0.30mm test.stl
1 Print 0.20mm test.stl at 0.20mm layer height with 0.4mm nozzle.
2 After print is done inspect print, see that pla is making good contact with bed.
3 Remove from bed measure print height with vernier.(should be 0.2mm)
Use 0.20mm layer height with 0.20mm test.stl
Use 0.25mm layer height with 0.25mm test.stl
Use 0.30mm layer height with 0.30mm test.stl
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
