Ender 3 Camera Mount

I designed this setup to travel in z with the extruder for the logi 270 camera. The camera swivel has to be disassembled and the weights need to be removed after that its a slip fit.

Print in ABS at 250 C with 20-40% infill and 108 C Bed Temp
This camera bolts directly to the gantry belt tensioner and works magnificently.

I recently found that a more distant view is desired for my camera so I've made a couple adjustments.The original design works fine but the new one has a slightly larger collar for the hardware and the distance has been increased by about an inch or so.