Ender 3 Draw / Tray

I wanted a design that would use the least amount of material not too stingy of course, have strength while work well with a 0.4mm nozzle and look kinda cool maybe..

Specs:

Width: 135.5mm

Height: 54mm

Depth: 160mm

Walls: 1.6mm thick, 4 lines with a 0.4mm nozzle

Gap between draws/container: 0.5mm all around. "This seems to be a perfect amount... 1st try.."

Material-settings;

Container: 100g infill 25% Cross *Cause it looks cool* Z-Seam Alignment: 300 x 400 y Z Seam Relative checked..

Bottom Draw: 80g Z-Seam Alignment: -110 x 200 y Z Seam Relative unchecked.

Top Draw : 56g Z-Seam Alignment: 120 x 300 y Z Seam Relative unchecked.

Best to print with a brim to help with warping on the sharp corners. Good adhesion is usually key.

I have made 3 designs each one saving between 10-20 grams of filament... if you want to save more, But I actually prefer the design I printed :D. If you don't like the stars and want a different logo ex: Ender logo, I can change t