Thingiverse

Ender 3 External Electronics Case – Bild 1

Ender 3 External Electronics Case – Bild 2

Ender 3 External Electronics Case – Bild 3

Ender 3 External Electronics Case – Bild 4

Ender 3 External Electronics Case

by MrClown

6k Downloads

3.8k Likes

20 Makes

Go to Model

WARNING:
>This case was designed to fit the stock Creality board.

>Although this case was never "advertised" as being designed for them, the V1.0 and V2.0 revisions of the BigTreeTech SKR Mini E3 also fit as they are the *exact* same size of the stock Creality board.

>Unfortunately, **the V3.0 revision of the SKR Mini E3 will not fit** this case as BigTreeTech decided to slightly increase the size of the board, and slightly alter the I/O spacing.

Ender 3 External Electronics Case
------------------

External electronics case integrating the stock LCD mounting bracket for the Ender 3

Uses stock parts, stock screws, and stock spare cable ties.
You will however need to extend the Z-stop wiring by your own means.

Design includes a mounting clamp for the XT60 connector which allows the power supply to be plugged directly in to the case. It does not feature a fan grill because the stock Ender 3 fan is significantly quieter without one.

Make sure you read the inst

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format