Thingiverse
Ender 3 Mounting Bracket
by haylocki
3
Downloads
0
Likes
0
Makes
This is a bracket for bolting the Ender 3 down to a work surface.
The bracket should be printed on it's side with support selected for the bolt holes.
You will need 2 x M5x15mm bolts, and one M6 bolt per Bracket.
To fit the brackets onto the rear of the printer you will also require an M5 tap as the rear of the extrusions are not already tapped.
The bracket should be printed on it's side with support selected for the bolt holes.
You will need 2 x M5x15mm bolts, and one M6 bolt per Bracket.
To fit the brackets onto the rear of the printer you will also require an M5 tap as the rear of the extrusions are not already tapped.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
