Ender 3 OctoPI Control Box

This is a Remix of https://www.thingiverse.com/thing:3072566. Based on the comments of others in there I decided I wanted a 5V rail as well as a 12V and 24V rail. Furthermore, I decided I preferred isolated grounds. As my wiring diagram only needed 3 ports for the 12 and 24 volt rails, I have used wago221-413 for these voltages and wago221-415 for the 5V lines. This resulted in the Wago Line being slightly longer.

Besides the Wago change, I made a few other minor structural changes. This is still a work in progress and things may change.

Update Log:
Latest Update
(08/15/2019)
No changes. Final update. I have printed the bottom and it works. My bolt holes were a tad loose but that is all. I have since decided to move on to a rear mounted box as viewed in a recent Teaching Tech video

(06/11/2019)
There was an issue with the 1x10 dupont slot on the right hand side box. I moved this slot more to the left to correct it.

(06/06/2019)
I decided I would rather have