Ender 3 Pro - Elevated Feet

After moving my Ender 3 Pro power supply to the rear of the machine, I needed to elevate the machine a little to be able to ensure there is enough clearance to give better airflow to the fan.Took inspiration from the model “Ender 3 Pro Feet using Nerf Rival Balls” by MoJee3D which is licensed under CC BY 4.0, but I do not have any Nerf Rival Balls.Ended up purchasing rubber feet from Jaycar and used 4 small squares in one piece and then stuck it onto the bottom of the print. https://www.jaycar.com.au/rubber-feet-small-stick-on-pack-of-4/p/HP0815Tab is then screwed in with M4 screws. If you have T-Slot Nuts, this will help, but I ended up just screwing it into the metal with an M4 screw.Print standing up with tab in the air. No supports needed. I went with 55% infill to ensure it was durable to hold the printer. You can print with less if you wish but YMMV.This object was remixed in Tinkercad. Edit it online: https://www.tinkercad.com/things/0wnRHsszDI5Print SettingsPrinter Brand:Creali