Thingiverse
Ender 3 / Pro Offset LCD Mount
by alexnettles
0
Downloads
0
Likes
0
Makes
Better viewing angle, offset to avoid bed. Curved for your viewing pleasure.
The holes for the M3 screws are 2.95mm so if your machine is set to print holes larger, then you may need 1/8" screws (which will probably work anyway).
Print two washers to make LCD snug around M3 screws.
The reason I use M3 here is they are cheaper and generally more abundant than M5. Included is the step file. Prototype in the picture has layer shifts from pausing haha hopefully yours will be better
The holes for the M3 screws are 2.95mm so if your machine is set to print holes larger, then you may need 1/8" screws (which will probably work anyway).
Print two washers to make LCD snug around M3 screws.
The reason I use M3 here is they are cheaper and generally more abundant than M5. Included is the step file. Prototype in the picture has layer shifts from pausing haha hopefully yours will be better
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
