Thingiverse
Ender 3 Pro - Shelf
por Cassin
20
Descargas
10
Likes
0
Makes
Extention / Addon for the **Creality - Ender 3 Pro**
to have all tools, components, some filament, a adhesive spray and all stuff i need around my printer i have designed a shelf fitting under my Ender 3 Pro Printer. The Shelf
The shelf is lasercutted out of 4mm MDF, after assambling the body and the 3 drawer i sanded everthing to give i a nicer look than with the burned lasercut sides. Mount the handles to the drawers with the M3x10mm bolts. Now you can but your printer on top and fill up your new storage module. If you also often carry around your printer as often is i do you can mount the shelf to the baseframe of the printer using - Spacer + Tnut + M3 nuts + M3x20mm countersunk bolts.
Materials / Prints:
1x MDF sheet 4x600x1200mm
8x M3 x 20mm countersunk bolts
8x M3 nuts
4x M3 x 10mm countersunk bolts
4x spacer.STL
2x handle_drawer_small.STL
1x handle_drawer_big.STL
8x t-nut_M3_x1.STL
Facts
max dimension of fitting filament spools: ø200x75mm (i use
to have all tools, components, some filament, a adhesive spray and all stuff i need around my printer i have designed a shelf fitting under my Ender 3 Pro Printer. The Shelf
The shelf is lasercutted out of 4mm MDF, after assambling the body and the 3 drawer i sanded everthing to give i a nicer look than with the burned lasercut sides. Mount the handles to the drawers with the M3x10mm bolts. Now you can but your printer on top and fill up your new storage module. If you also often carry around your printer as often is i do you can mount the shelf to the baseframe of the printer using - Spacer + Tnut + M3 nuts + M3x20mm countersunk bolts.
Materials / Prints:
1x MDF sheet 4x600x1200mm
8x M3 x 20mm countersunk bolts
8x M3 nuts
4x M3 x 10mm countersunk bolts
4x spacer.STL
2x handle_drawer_small.STL
1x handle_drawer_big.STL
8x t-nut_M3_x1.STL
Facts
max dimension of fitting filament spools: ø200x75mm (i use
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
