Ender 3 (Pro) Spring Guides

Note that these guides are designed for springs with an outer diameter of 8mm.Why?The original compression springs on my Ender 3 Pro print bed mount were buckling.To ensure that the springs stay in shape while being compressed I made these guides.What does it do?You should end up leveling your bed less often with these.Files included:Top partBottom partShorter bottom part for the original cable mount / cable chain mountOptional hardware:4x nut M48x washer for M4What to print:4x Top guide3x Bottom guide1x Bottom guide for the original cable mountNote that if you don't want the thread on the upper guide just print the lower guide 7 times (+1 for the cable mount) instead.*Your feedback:Anything you would change? Just let me know.Print SettingsPrinter brand:CrealityPrinter:Ender 3Rafts:NoSupports:NoResolution:0.1Infill:100%Post-PrintingCut the M4 thread / check the holes:Use a wrench (size 12) to hold the upper guide in place and screw a M4 bolt through it. Do this with all four upper guides. Now take your lower guides and check if the M4 bolt goes through easily. If they don't widen the holes until it fits.