Ender 3 Pro Tool Tray

Decided to make my own Ender 3 PRO tray (not sure if this will also fit the non pro as the Y axis extrusions are different) as couldnt find any 'pro' specific ones I liked.

I wanted something that would snap in without dismantling the y axis or removing the LCD and also that required minimum support or time to print.
I also wanted one that would slide forward and back to match the lines of the printer and give easier access. It also wraps slightly under the Y axis to provide enough width for the side cutters, whilest not blocking the fan intake for the control PCB.

Walls are all 1.6mm thick, which is ample -Other designs I've seen were 3 to 4mm thick which is a waste IMO.

Approx 100g of material is needed. I The version in pictures is an old one... i made some minor screw ups like the usb SD adaptor holder sat to high and fouled the bed adjustment wheel. The STL uploaded should fix this as it drops it lower.

Also added some radius's and chamfers to strengthen weak areas