Ender 3 / Pro / V2 Light Mod

Light Mod for Ender 3 / Pro / V2. Soldering and assembly required. Done so at your own risk. Uses Ender 3 Pro 24v power supply to power 12v LED lights via a potenital divider made with two 1k ohms resistors in series. See pictures and diagram. Bulb holders held in place with buld covers which are glued on after the bulb holders are inserted. All soldering best done before assembly. I purchased the Bulbs, Holders and Switch from https://www.autoelectricsupplies.co.uk/ see attached shopping cart image for part numbers.

Other Items needed:

Shrink Sleeve for the switch terminals
Cable
Veroboard for the circuit
2 x 1K ohm resistors
2 x T-nuts and bolts (I used the ones from the Z axis switch as I have a BL Touch installed)
2 x ring terminations (to connect to printer power supply)

Tools:

Hot glue gun
Soldering iron and solder
crimp tool for ring terminations
Allen Keys (From printer kit)

Things to note:

Cable to be soldered to veroboard as per the circuit s