Thingiverse
Ender 3 Top Mount Extruder Bracket
door mijoni
5
Downloads
3
Likes
0
Makes
A bracket to relocate the Ender 3 extruder to the top frame. Also includes a filler/wiring bracket for the hole left in the original extruder bracket and extrusion slot covers to protect the wiring.
You will need 4 t-nuts, screws, flat and lock washers to mount the bracket to the frame. Original hardware may be used to mount the extruder stepper to the new bracket, BUT: you may have to substitute slightly longer screws depending on what works. Check before mounting.
A filler plate is included to neaten up the appearance of the old extruder mount and to provide a tie wrap point for the hotend wiring harness. It can be mounted using small self-tapping screws or machine screws depending on what you have on hand.
My factory extruder wiring reached the new location with a bit to spare. Also included is a cover for the extrusion slot to protect the wiring (you will need to print 2)
You will most likely need to replace your Bowden tube with a longer one.
You will need 4 t-nuts, screws, flat and lock washers to mount the bracket to the frame. Original hardware may be used to mount the extruder stepper to the new bracket, BUT: you may have to substitute slightly longer screws depending on what works. Check before mounting.
A filler plate is included to neaten up the appearance of the old extruder mount and to provide a tie wrap point for the hotend wiring harness. It can be mounted using small self-tapping screws or machine screws depending on what you have on hand.
My factory extruder wiring reached the new location with a bit to spare. Also included is a cover for the extrusion slot to protect the wiring (you will need to print 2)
You will most likely need to replace your Bowden tube with a longer one.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
