Thingiverse
Ender 3 V2 BLTouch mount
by WT290
7
Downloads
8
Likes
0
Makes
Lightweight BL/CR/3D Touch mount.
I bought one of those "cheap" "3DTouch" devices which claimed to suit the Ender 3 V2. The correct mount (and the cable supplied) doesn't fit the V2. You can cut and drill the supplied mount and it will fit but my supplied 3DTouch is a bit longer than the standard device and seems to crash on anything (a blob for example) that is on the bed.
This mount has a slightly (2mm) higher mount arm and has fixed my problems. It uses the standard 2mm mounting holes on the hot end support plate. To fix the BLTouch to the mount, the 2 holes are a tiny bit undersized so a pair of 2mm screws will cut into the plastic and support the BLTouch quite firmly.
I printed mine in PETG with slightly elevated infill (20%).
I bought one of those "cheap" "3DTouch" devices which claimed to suit the Ender 3 V2. The correct mount (and the cable supplied) doesn't fit the V2. You can cut and drill the supplied mount and it will fit but my supplied 3DTouch is a bit longer than the standard device and seems to crash on anything (a blob for example) that is on the bed.
This mount has a slightly (2mm) higher mount arm and has fixed my problems. It uses the standard 2mm mounting holes on the hot end support plate. To fix the BLTouch to the mount, the 2 holes are a tiny bit undersized so a pair of 2mm screws will cut into the plastic and support the BLTouch quite firmly.
I printed mine in PETG with slightly elevated infill (20%).
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
