Ender 3 V2 conversion kit for Ender 3 Pro

Turn your Ender 3 Pro into an Ender 3 V2 ising the Ender 3 Pro's LCD mount. The only prerequisit is that the Ender 3 Pro needs to have a Crealily 32bit board (either v4.2.2 or v4.2.7) and install the appropriate firmware. I strongly recommend Jyers firmware as is leagues above the stock one.

The parts are best printed in PLA with 100% infill and brim for extra adhesion.

The LCD back cover's mounting holes need to be drilled and tapped to M3. Additional hardware needed consists on 2 M3x10 allen head bolts, 4 M3x15 countersunk bolts and 4 M3x5 allen head bolts.

This mofification will NOT work with Ender 3 Neo due to the different architecture of the toolhead shroud. One workaround is the purchase of the extended display bracket for Ender 5 series/Ender 3 Max and the other is using the bracket that is shipped with the V2 display.