Ender 3 V2 Dial Indicator Mount

This is a mounting block to solidly mount a dial indicator to any 2020 T-slot rail, but I adjusted the height so the indicator in the link below lines up with the table edge of a Creality Ender 3 V2. None of the bolt holes are threaded so you can use different bolts if you want. This will clear the Y axis belt on the Ender 3.

You will need the following hardware to complete:
1ea. - 1/4" x 1" bolt (option M6 x 20)
1ea. - 1/4" nut (not enough room for a wing nut, option M6)
2ea. - 1/4" washer (optional, I didn't want the bolt to mangle the plastic)
2ea. - M4 x 12 bolt ( I used thumb screws so I didn't need tools to move it
2ea. - M4 twist in T-slot nuts

cheap dial indicator here:
https://www.amazon.com/Metric-Indicator-Precision-Measuring-Instrument/dp/B07K3V4DK7/ref=sr_1_5?dchild=1&keywords=metric+dial+indicator&qid=1612025228&sr=8-5