Ender 3 v2 PETG temperature tower gcode (fixed)

For self reference, and for whomever needs it, this is a ready made gcode rendition I made of the original part, with:

- 0.4 nozzle, 0.2 layer height
- single wall
- no supports (obviously)
- no infill
- half height base (0.5mm instead of 1mm)
- 60mm/s speed
- no fan (except on bridges)
- lower speed on bridges and overhangs

EDIT: fixed, first release switched temperature every 5mm instead of 10! Should work now, about to test it

EDIT2: after two subsequent edits it should now work! I hope!!!