Thingiverse
Ender-5 Bed Strain Relief
von derandi3d
6.9k
Downloads
3.1k
Likes
90
Makes
Strain relief for the Ender 5 heat bed wires.
Mounted to the carriage using M4x12 or M3x12 + nut.
----
## 23.2.2019 Version 2
To avoid too much bending the wires if you level up and down higher than normal, i made some changes:
* 5mm more distance from bed.
* Larger radius.
* Only one cable tie.
More than +-5mm should now be possible without problems.
Mounted to the carriage using M4x12 or M3x12 + nut.
----
## 23.2.2019 Version 2
To avoid too much bending the wires if you level up and down higher than normal, i made some changes:
* 5mm more distance from bed.
* Larger radius.
* Only one cable tie.
More than +-5mm should now be possible without problems.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
