Thingiverse
Ender 5 LCD Screen Mount - Adjustable
par engineerily
6
Téléchargements
1
Likes
0
Makes
Remix of Hangtight's screen stand updated with adjustable legs and embedded nyloc washers.
Parts list:
2x M3 nyloc nuts (recommended, or use regular M3 nuts if they are all you have)
2x M3x12 bolts (M3x16 should fit as well)
Printing instructions:
1. Printed in PETG with 0.4mm nozzle and 0.2mm layer height. Normal supports from buildplate only for the bottom two overhangs; the top screen opening was bridged (~40mm).
1. Pause at layer 59 to drop first nyloc nut in
2. Pause at layer 549 to drop second nyloc nut in
After printing the screen mount and both stand pieces, simply insert the bolt on each side through the leg piece and tighten into the embedded nyloc nuts until the legs don't move and adjust to your desired angle.
Leave a comment with any questions or issues. The original Fusion 360 file is included for easy modification to your needs. Also included sample Cura and GCODE files.
Parts list:
2x M3 nyloc nuts (recommended, or use regular M3 nuts if they are all you have)
2x M3x12 bolts (M3x16 should fit as well)
Printing instructions:
1. Printed in PETG with 0.4mm nozzle and 0.2mm layer height. Normal supports from buildplate only for the bottom two overhangs; the top screen opening was bridged (~40mm).
1. Pause at layer 59 to drop first nyloc nut in
2. Pause at layer 549 to drop second nyloc nut in
After printing the screen mount and both stand pieces, simply insert the bolt on each side through the leg piece and tighten into the embedded nyloc nuts until the legs don't move and adjust to your desired angle.
Leave a comment with any questions or issues. The original Fusion 360 file is included for easy modification to your needs. Also included sample Cura and GCODE files.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
