Thingiverse
Ender 5 Pen Adapter
von IamSLy
25
Downloads
8
Likes
0
Makes
Pen Holder for the Creality 3D Ender-5.
Features a Z-Rail sliding up tensioned by an elastic.
You will need:
- 1 elastic
- Either:
- 4 M3 bolts if using ZRailSlider
- 4 3mm Wood Screws if using ZRailSliderWoodScrews
Printing:
- Make sure you have your "Horizontal Expansion" setting calibrated as the tolerances are pretty tight. Typical value for the Endre 5 is around -0.07mm.
- No supports needed: Print every component without rotating them. (The Ender5Adapter itself is designed to be printed slanted)
- 2 versions of the sliders are available: using M3 bolts / using Wood Screws.
Enjoy your new drawing machine! :)
New Beta version on Onshape (untested):
https://cad.onshape.com/documents/15b38bd352a0c111b76e6697/w/eaad52d1b0d5bfbdda3ace41/e/f9b81f8b06f323dd23df1388
Features a Z-Rail sliding up tensioned by an elastic.
You will need:
- 1 elastic
- Either:
- 4 M3 bolts if using ZRailSlider
- 4 3mm Wood Screws if using ZRailSliderWoodScrews
Printing:
- Make sure you have your "Horizontal Expansion" setting calibrated as the tolerances are pretty tight. Typical value for the Endre 5 is around -0.07mm.
- No supports needed: Print every component without rotating them. (The Ender5Adapter itself is designed to be printed slanted)
- 2 versions of the sliders are available: using M3 bolts / using Wood Screws.
Enjoy your new drawing machine! :)
New Beta version on Onshape (untested):
https://cad.onshape.com/documents/15b38bd352a0c111b76e6697/w/eaad52d1b0d5bfbdda3ace41/e/f9b81f8b06f323dd23df1388
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
