Ender 5 Plus Belted Z Axis

Basic redesign of suavewarrior's belt mod. This will completely eliminate any z-wobble problems. The bed will slowly fall after power off, but that didn't bother me that much because the printer will home the z axis before every print anyway. I might make a redesign in the future to use a worm gear when I can find a good source for one. This mod will require you to raise the bed with ether this mod https://www.thingiverse.com/thing:3890803 or my own version. With mine you only lose about 5-10mm of build volume. IMPORTANT, you will need to reverse the direction of one of the motors by flipping the wires. Also, I don't know if this would work on the normal ender 5. I don't have one so I can't test it, but it should fit so maybe.

Parts list:
2x 60T-20T closed loop GT2 belt and pullies, 5mm bore
2x 20T GT2 Pully, 5mm bore
6x 20T GT2 Pully idlers, 5mm bore
1x 5m GT2 Timing belt
6x 20mm Shafts, 5mm diameter
4x 25mm Shafts, 5mm diameter
4x 30mm Shafts, 5mm diameter
2x 50mm Shafts,