Ender 5 Plus Extruder Arm

This Arm allows to place the extruder a bit over the Bed and therefore shortening the bowden tubing to around 43 cm, but measure yourself after installation, as it depends on hotend and extruder.

The Arm is a bit flexible which acts as a vibration damper for the extruder and also safes you in case you cut the bowden tube a bit to short.

The hole distance is 1cm, diameter 3,5mm, so you can create your own attachments.

An extruder mount and an cable clip for routing the cables is included with Fusion 360 parametric files in case you want to customize. If you have big hands, make sure to install the extruder adapter first and then the stepper, as you will be unable to reach the screws below the arm.