Thingiverse
Ender 5 Plus - Material test
16
Download
5
Likes
0
Makes
Hello everyone,
I made 2 heat towers to test an ender 5 plus with PLA, ABS, PLA carbon fiber, TPU and more. I made some G-codes with some variables : Temperature, fan% and speed. I made it with simplify 3D and i put the parameters i used in the pictures on this topics. The zip file containe some Gcodes to test your material. If you want to slice it yourself, i put the STL file online too.
For the Gcode, there are codification for the files :
BXX = Bed temp -> B90 = 90 degC for bed
VXXXX = Speed of the printer -> V5000 = 5000mm/min
FXX = Fan speed (%) -> F50 = 50% Fan
Hope you will find your optimum parameters for your materials!
Have fun :)
I made 2 heat towers to test an ender 5 plus with PLA, ABS, PLA carbon fiber, TPU and more. I made some G-codes with some variables : Temperature, fan% and speed. I made it with simplify 3D and i put the parameters i used in the pictures on this topics. The zip file containe some Gcodes to test your material. If you want to slice it yourself, i put the STL file online too.
For the Gcode, there are codification for the files :
BXX = Bed temp -> B90 = 90 degC for bed
VXXXX = Speed of the printer -> V5000 = 5000mm/min
FXX = Fan speed (%) -> F50 = 50% Fan
Hope you will find your optimum parameters for your materials!
Have fun :)
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!