Ender 5 plus stepper mounts

Ender 5 plus stepper mounts. These mounts are the same height as the ZeroG Mercury 1 mounts. They have 3 mounting points and allow for enclosed printer due to the mounts not protruding from the frame. So, if you want a gantry setup to use these mounts, check the Zero G mercury 1 files.

These mounts use 5mm bolts for the mounting to the 2020 extrusion.
F695 bearings QTY: 6 for each side.
You will need bearing shims for these mounts(total: 12 per side if .5mm thick). I use .5mm thick shims.
QTY: 2- 5mm diameter HSS shafts, 45mm long each
QTY:3 5mm washers for each stepper mount
QTY:4- 3mm washers to mount the motor.

I print these in ABS, with .3 layer height. You can choose what settings you like!