Thingiverse
Ender 5 (Pro/Plus etc) Rear Cable Support
door Badadz
74
Downloads
31
Likes
0
Makes
Ender 5 Rear Cable Support
This cable support will route the cable upwards to help keep it off the bed.
Two pieces that fit inside each other and squeezed tight with zip ties and attached to the frame with 2 x M4 bolts and T-nuts
Update 01/04/2021: Thicker version added as 'Ender 5 Plus Rear Cable SupportV2.stl'
Original 'Ender_5_Plus_Rear_Cable_Support.stl' still available
(I was a little rough with mine so build a thicker one)
Same insert works for both
Required:
2 x M4x8mm bolts
2 x M4 Tnuts
2 x Zip Ties
Hope you find this useful.
This cable support will route the cable upwards to help keep it off the bed.
Two pieces that fit inside each other and squeezed tight with zip ties and attached to the frame with 2 x M4 bolts and T-nuts
Update 01/04/2021: Thicker version added as 'Ender 5 Plus Rear Cable SupportV2.stl'
Original 'Ender_5_Plus_Rear_Cable_Support.stl' still available
(I was a little rough with mine so build a thicker one)
Same insert works for both
Required:
2 x M4x8mm bolts
2 x M4 Tnuts
2 x Zip Ties
Hope you find this useful.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
