Ender 6 Filamentsensor-fix/ Spacer

my filament sensor did not activate while filament was loaded. Problem was that the switch inside was bend up (away from the filament), fixed it with this little plate that press down on the switch.
Fusion and Step file is included if you need a thicker spacer you can customize it.
you cant use the original screws after the mod!
I used M3x 16mm hex screws.
#
Note: It might introduce a strange noise because of the roller on the endstop working the right way for the first time and actually roll. A drop of oil on the roller axis did the job on my Sensor