Thingiverse
Ender3 V2 Y-Axis Upgrade Bracket
by DigitalVerve
13
Downloads
7
Likes
0
Makes
Y-Axis Upgrade to solve Stepper overheating and slipping, re-uses all fittings. Requires Spare /New 42-40 Stepper and original /new Belt Pulley.
If you have this problem, I would recommend:
1. Check belts and pulleys first.
2. You can adjust the stepper voltage potentiometer to try help (motor will still run hot), only try this if you are electrically competent. You can search online for the procedure.
3. If nothing fixes it, or you want your Y-Stepper to run cooler, this absolutely will fix it.
Orientate to print as per Picture in CURA. See details for print settings and more info.
If you have this problem, I would recommend:
1. Check belts and pulleys first.
2. You can adjust the stepper voltage potentiometer to try help (motor will still run hot), only try this if you are electrically competent. You can search online for the procedure.
3. If nothing fixes it, or you want your Y-Stepper to run cooler, this absolutely will fix it.
Orientate to print as per Picture in CURA. See details for print settings and more info.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!