Endless stripes - HueForge

Endless stripes - Hueforge   If you use the STL, please note the settings. Otherwise, load profile.   Setting: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA JAYO Black Transmission Distance: 0.3 PLA JAYO Gray Transmission Distance: 2.5 PLA BambuLab Basic Jade White Transmission Distance: 5 !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Gray At layer #16 (1.36mm) swap to Jade White for the rest.