Engine Meter Mount Revolution 26

This is just a quick mount for an engine meter/hour tracker that i made for my Reel Rollers Revolution 26 mower. The bar was 22.5mm so theorectically would work with any bar same diameter give or take mm or two.

The meter used was from amazon https://www.amazon.com/dp/B08GS2HZ7G

I uploaded 2 files, one with holes to use the screws that come with the meter, and heat set inserts also. I prefer heat set inserts for ability to take something on and off a few times.

Any 3mm screw insert should work as long as it's not longer than 7mm long, the particular ones i used were these as i had them on hand https://www.amazon.com/gp/product/B077CHDSTR

The screw i used was a socket head 3mm x 10mm