Enterprise LED Display

A buddy of mine recently got a Glowforge and I asked him to etch a picture into a 98mm x 98mm x 2.9mm piece of acrylic. Gave him a picture I like and my friend did a great job making my etching. With the acrylic piece in hand, I designed this display case to hold the piece of acrylic and hide a short LED strip.

Soldered 2 wires to the end of the a short 5V LED (cool white) strip - bough wire bundle with 2 wires inside. Soldered other end of the wire to a standard USB plug insert making sure "+" on the LED Strip was connected to Pin 1 and "-" was soldered to pin 4. Next enclosed the standard USB insert into its housing. Then Verified that the LED Strip lit up when USB plug was plugged in. Lastly, inserted the other end of the LED strip down through the underside slot of the main body with the LEDs facing towards the opening. Re-verified that LEDs lit up when plugged into USB port.

Scaled the logo to the size indicated for the partial circles. Printed out 2 mirror reverse copies