Thingiverse
EOD Master Badge
por nathanaelbanden
135
Descargas
84
Likes
1
Makes
This is the EOD Master Badge.
The model is one solid piece.
Dimensions are shown in the PDF.
Recommendations:
1) Print vertically along the Y-axis for best resolution. This works very well even down to 25% scale.
2) Print at 100% density up to 100% scale, then drop to 30-50% infill if you're printing bigger
3) Print slowly, about 30mm/s
The model is one solid piece.
Dimensions are shown in the PDF.
Recommendations:
1) Print vertically along the Y-axis for best resolution. This works very well even down to 25% scale.
2) Print at 100% density up to 100% scale, then drop to 30-50% infill if you're printing bigger
3) Print slowly, about 30mm/s
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
