Thingiverse
EPaper Dashboard with Ikea Frame
door kevin1995m
4
Downloads
5
Likes
0
Makes
The chassis is designed to integrate all components (ePaper display, ESP32, battery, and power modules) into a single compact block that fits perfectly inside the IKEA RÖDALM 13x18 cm frame. It ensures a clean and cable-free installation.
Assembly Instructions:
- Print all pieces using PLA or PETG (0.2 mm layer height recommended).
- Glue the ePaper holder to the main chassis body (use superglue or epoxy).
- Insert all electronic components into their dedicated slots (ESP32, battery, MT3608, TP4056, etc.).
- Fix the back cover using four M3×5 mm screws.
- The result is a compact, self-contained unit that slides neatly into the frame with no visible wiring.
[Complete Tutorial here](https://tech-my-mind.com/posts/tutos/photoframe-epaper-dashboard/)
Assembly Instructions:
- Print all pieces using PLA or PETG (0.2 mm layer height recommended).
- Glue the ePaper holder to the main chassis body (use superglue or epoxy).
- Insert all electronic components into their dedicated slots (ESP32, battery, MT3608, TP4056, etc.).
- Fix the back cover using four M3×5 mm screws.
- The result is a compact, self-contained unit that slides neatly into the frame with no visible wiring.
[Complete Tutorial here](https://tech-my-mind.com/posts/tutos/photoframe-epaper-dashboard/)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
