Thingiverse
Epipen Clamp
par CedarStudio
10
Téléchargements
25
Likes
0
Makes
Hi, I modeled an Epipen holder.
Please upload a picture of your make, this would be rewarding for me 😇
📠 Print:
Print with regular settings (20% infill), back against the plate.
🪛 Mount:
Can be mounted with M4 bolt or 3,5 mm (head) wooden screws, or some strong double sided tape.
You can "Epipen Clamp_holes" if you think of screwing it or Epoxy glue it to a surface.
You can use "Epipen Clamp_Blank(no_holes)" if you think of gluing it with double sided tape or create your own attachement support.
©This model is for free - Do not resell or redistibute as your own - Private and educational use only
If you want to use this in a commercial or professional setting please contact me.
Please upload a picture of your make, this would be rewarding for me 😇
📠 Print:
Print with regular settings (20% infill), back against the plate.
🪛 Mount:
Can be mounted with M4 bolt or 3,5 mm (head) wooden screws, or some strong double sided tape.
You can "Epipen Clamp_holes" if you think of screwing it or Epoxy glue it to a surface.
You can use "Epipen Clamp_Blank(no_holes)" if you think of gluing it with double sided tape or create your own attachement support.
©This model is for free - Do not resell or redistibute as your own - Private and educational use only
If you want to use this in a commercial or professional setting please contact me.
CedarStudio publie également sur
2 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
