Thingiverse
EQDIRECT-BT
von patatofour
3
Downloads
1
Likes
0
Makes
Designed up this enclosure for the EQDIRECT Bluetooth module for the Skywatcher NEQ-6 Pro. The EQMOD project can be found here :
http://eq-mod.sourceforge.net/eqdirect2.htm
Printing:
Ring - Infil 20%
Supports needed for the body.
Lid is split so you can print letters and lid separately. Glue in lettering.
Holes are there to screw the connector to the mount connector.
Parts needed :
- DB9 male connector
- LM7805 voltage regulator
- HC-05 Bluetooth module
- Some small wires
- 2x 4-40 screws (optional)
Soldering involve
http://eq-mod.sourceforge.net/eqdirect2.htm
Printing:
Ring - Infil 20%
Supports needed for the body.
Lid is split so you can print letters and lid separately. Glue in lettering.
Holes are there to screw the connector to the mount connector.
Parts needed :
- DB9 male connector
- LM7805 voltage regulator
- HC-05 Bluetooth module
- Some small wires
- 2x 4-40 screws (optional)
Soldering involve
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
