Thingiverse
ER-16 Collet box
por CFSolutions
5
Descargas
4
Likes
0
Makes
Another storage box.
I designed it for the ER-16 collet serie from 1 to 10 mm including an extra 3.17 mm (1/8 ") and space for a Nut.
To print the letters collored, change the filament to your desired color when the letters starts (at 21,8mm) to print. A rod with a diameter of 1.5mm is used in the hinge use a pianowire or carbon rod or whatever you like.
On the lid the letters can filled in with paint or just leave it as it is.
I designed it for the ER-16 collet serie from 1 to 10 mm including an extra 3.17 mm (1/8 ") and space for a Nut.
To print the letters collored, change the filament to your desired color when the letters starts (at 21,8mm) to print. A rod with a diameter of 1.5mm is used in the hinge use a pianowire or carbon rod or whatever you like.
On the lid the letters can filled in with paint or just leave it as it is.
CFSolutions también publica en
20 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
