Ergonomic Delta table

All parts are correctly oriented and can be printed with a layer height of 0.2 mm. You need 6 approx. 20x5mm feathers + 3 small rubber bands. The part description shows how many times the part must be printed. Update 100% 3D Printed:If you don&#39;t have any springs you can also print the 100% 3d printed version, you have to print the following files additionally:6 Springs, 6x Arm (100% 3D printed)You don&#39;t have to print the normal arm files! Building instructions:1. connect the three rails to the main part and fasten it with the 3 knobs.2. connect the trolley with a rubber band to the button as shown in the picture.3. Secure it with the rod.4. Repeat step 2+3 twice and slide it onto the rails.5. Prepare the arms by attaching two arms each with two springs.6. now use the arms from step five to attach the table with the rest, slide the flex arm holder onto the table and attach as many flex arms as you like, then add the clamp.<img class="image_resized" style="width: 5