Thingiverse

ESP32-CAM Enclosure

by VaTTeRGeR

201 Downloads

218 Likes

4 Makes

Compact enclosure for the ubiquitous ESP32-CAM with the USB-Serial board and an external antenna. The program- and reset-button are still accessible through the cooling slits.

Update: SD-Card also accesible now!

The holes in the bottom piece are laid out in a 34x21mm rectangle. They are sized for M3-5x5mm threaded inserts.

Use the combined *.stl file for easy printing. Print time is 3 hours with average printing speeds and 100% infill. Support should not be necessary if your cooling is sufficient.

Additional Materials:
1. Glue (Cyanacrylate aka Super Glue is recommended)
2. Optional: Threaded inserts M3-5x5mm

Assembly:
1. Insert the Camera into the front piece, guiding the antenna cable through the small gap on the side of the enclosure.
2. Screw the SMA-Connector to the bottom piece and wind the excess antenna cable into a loop.
3. Test fit the two halves, then glue together with super glue once everything fits. The two halves are self aligning.
4. Melt the thread

camera camera mount electronics enclosure enclosure esp32 ESP32-CAM esp32cam esp32cam box housing shell camera camera mount electronics enclosure enclosure esp32 ESP32-CAM esp32cam esp32cam box housing shell

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

significant post-processing

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 2/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

34 mm (Small)

Est. print time

3 h

Post-processing

Gluing, Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for ESP32-CAM Enclosure?

Any FDM printer should handle ESP32-CAM Enclosure just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 34 mm is recommended.

How long does it take to print ESP32-CAM Enclosure?

According to the design notes, ESP32-CAM Enclosure takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is ESP32-CAM Enclosure available in?

ESP32-CAM Enclosure is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is ESP32-CAM Enclosure free to download?

Yes, ESP32-CAM Enclosure is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

ESP32-CAM Enclosure

Similar Models

Add to Collection