ESP32 DIV V2 Enclosure

A clean, functional enclosure designed for the ESP32 DIV V2, printed in carbon fiber filament for a premium look and feel. The case features cutouts for the integrated display, the 6-button input matrix, antenna pass-throughs at the top, and dual slot openings on the front face for connectors or card access. Features: Snug fit for the ESP32 DIV V2 board Display window with flush bezel 6-button grid cutout aligned to the onboard tactile switches Multiple antenna ports at the top for RF modules Front-facing slot cutouts for SD card / USB / module access Two-part design (top shell + bottom tray) with snap or screw fit Print Settings: Material: Carbon Fiber PLA/PETG (recommended for rigidity and aesthetics) Layer height: 0.15–0.2 mm Infill: 20–30% Supports: Minimal / interface only for overhangs around antenna ports Printer: Any FDM printer with a 0.4 mm nozzle Notes: Feel free to remix and adapt. If you have the exact board variant (antenna config, button layout), double-check the cutout