Thingiverse
Electronics
Voir le modèle
ESP32-S2 Feather TFT STEMMA Case
50
Téléchargements
43
Likes
0
Makes
https://youtu.be/nKFDXzp5-So
Guide: https://learn.adafruit.com/feather-tft-stemma-case
3D print a Stemma case for the Adafruit TFT Feather with ESP32-S2.
This dev board features a 1.14 inch display with a Lipo battery charging circuit and battery monitor.
It's has the ESP32-S2 mini module which works with both Arduino or CircuitPython.
We designed and 3D Printed a snap fit case to make a little compact IoT project.
You can easily add STEMMA QT breakouts like temperature and humidity sensors.
The two buttons on the front are accessible so you can quickly reboot or get into the bootloader.
The STEMMA QT connector is also accessible, so you can daisy chain your sensors and make a portable IoT project.
You can 3D print the parts without any support material using your favorite filament.
Guide: https://learn.adafruit.com/feather-tft-stemma-case
3D print a Stemma case for the Adafruit TFT Feather with ESP32-S2.
This dev board features a 1.14 inch display with a Lipo battery charging circuit and battery monitor.
It's has the ESP32-S2 mini module which works with both Arduino or CircuitPython.
We designed and 3D Printed a snap fit case to make a little compact IoT project.
You can easily add STEMMA QT breakouts like temperature and humidity sensors.
The two buttons on the front are accessible so you can quickly reboot or get into the bootloader.
The STEMMA QT connector is also accessible, so you can daisy chain your sensors and make a portable IoT project.
You can 3D print the parts without any support material using your favorite filament.
adafruit publie également sur
1 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
