Espeon (HueForge)

Project: Espeon.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 142.6x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filamentsSwap Instructions: Start with BlackAt layer #8 (0.72mm) swap to Blue GrayAt layer #14 (1.2mm) swap to GrayAt layer #18 (1.52mm) swap to Ivory White for the rest. Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged. Boost MeDo you like my model?Then I would be very grateful for your support with a free boost token. Thank you very muchGefällt Ihnen mein Modell?Dann würde ich mich über eine Unterstützung mit einem kostenlosen Boost-Token sehr fr