Espresso Machine | Playkitchen

I designed an espresso machine for my daughter.

She is two years old so it's without a bayonet mount but attaches with a magnet.
The hole for the magnet and the washer are made for M4 screws.

The magnet is a standard cheap neopdym magnet from amazon in around 25mm /1inch diameter. It comes with a washer.

The button is a 12mm pushbutton i had, also from amazon, or you just print a 12mm dome and use that. If you can't model and need a printabel solution just contact me and i will add it to the project.

I always sand my prints and paint it with acrylic paint to make them smoother as i mainly print in dark grey or white.

I used matte uSun PLA.