Thingiverse
ET4 "Arraying" cable breakout for ez board replacement
15
Download
15
Likes
0
Makes
This is a Gerber file that breakouts out the "Arraying" calbe on the ET4 style printers for an ez drop in replacement on the mainboard side. Giving you an easy way for rewiring and/or going back to the original cable.
It takes the IDC 20-pin connector and it breaks it out to 2.54 spaced pads in which you can use normal headers or JST connectors.
It also breaks out the Bed molex into 2.54 spaced pads for the thermistor and screw terminals for the Heat bed.
The notch on the IDC 20-pin box connector should be facing away from the edge.
It cost me 10Euros to ship from JLCPCB (On the option "Remove Order Number" choose "Specify Location")
You could use any other PCB manufacturer as well.
Original Bed connector 6PIN: https://www.aliexpress.com/item/4000229636156.html?spm=a2g0o.cart.0.0.1abe3c00CLnNmW&mp=1
Screw terminal: https://www.aliexpress.com/item/32988969394.html?spm=a2g0o.productlist.0.0.1a3c76cboANHG2&s=p&ad_pvid=202009210338424263098507180800000230244_6&algo_pvi
It takes the IDC 20-pin connector and it breaks it out to 2.54 spaced pads in which you can use normal headers or JST connectors.
It also breaks out the Bed molex into 2.54 spaced pads for the thermistor and screw terminals for the Heat bed.
The notch on the IDC 20-pin box connector should be facing away from the edge.
It cost me 10Euros to ship from JLCPCB (On the option "Remove Order Number" choose "Specify Location")
You could use any other PCB manufacturer as well.
Original Bed connector 6PIN: https://www.aliexpress.com/item/4000229636156.html?spm=a2g0o.cart.0.0.1abe3c00CLnNmW&mp=1
Screw terminal: https://www.aliexpress.com/item/32988969394.html?spm=a2g0o.productlist.0.0.1a3c76cboANHG2&s=p&ad_pvid=202009210338424263098507180800000230244_6&algo_pvi
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!