Thingiverse
EUC stand 2.0 Stack them
von EUCGUY
7
Downloads
7
Likes
0
Makes
Still working on it. ill update here later.
Update 03.12.2017: The space inbetween the 20mm pvc tubes are plenty for a Msuper v3.
Soo, someone wanted me to create this and so i did. should be easy to print and put together.
Use M7 screws washers and nuts.
20mm Stiff pvc tube. [▼cut into the length you need]
Epoxy glue is reccomended to fuse the parts at the top because of the added stress.
Update 03.12.2017: The space inbetween the 20mm pvc tubes are plenty for a Msuper v3.
Soo, someone wanted me to create this and so i did. should be easy to print and put together.
Use M7 screws washers and nuts.
20mm Stiff pvc tube. [▼cut into the length you need]
Epoxy glue is reccomended to fuse the parts at the top because of the added stress.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
