Thingiverse
Eurorack Korg Volca Panel
par grappendorf
126
Téléchargements
102
Likes
1
Makes
This is a 40HP Eurorack panel for mounting Korg Volca synthesizers directly into a Eurorack system.
Remove the Volca case from the PCB, desolder the battery and speaker cables and use 4 of the original screws to attach the Volca PCB to this Eurorack panel.
You need a 9V power supply to power the Volcas. You can either use a wall adapter or you can create a simple 12V to 9V linear regulator on a small perfboard to directly power the Volcas from your Eurorack power bus (In my case i also added a simple amplifier to boost the Volca audio output to the Eurorack audio level).
http://www.grappendorf.net/projects/eurorack/korg-volca-panels.html
Remove the Volca case from the PCB, desolder the battery and speaker cables and use 4 of the original screws to attach the Volca PCB to this Eurorack panel.
You need a 9V power supply to power the Volcas. You can either use a wall adapter or you can create a simple 12V to 9V linear regulator on a small perfboard to directly power the Volcas from your Eurorack power bus (In my case i also added a simple amplifier to boost the Volca audio output to the Eurorack audio level).
http://www.grappendorf.net/projects/eurorack/korg-volca-panels.html
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !