Slicer Discord
Ewe Baskets Lampe – 3D-printbaar model van MakerWorld MakerWorld
Decor

Ewe Baskets Lampe

door TechDino · Decor
7 Downloads
6 Likes
2 Makes
Model downloaden
my brother-in-law is a big fan of the ewebaskets in oldenburg and so i built a lamp for him.You need these leds for it:https://www.amazon.de/dp/B07C1PQMNC?psc=1&ref=ppx_yo2ov_dt_b_product_detailsThis battery holder:https://www.amazon.de/dp/B07MQ9DNP6?psc=1&ref=ppx_yo2ov_dt_b_product_detailsthis battery:https://amzn.eu/d/eHQB3qDand this switch:https://www.amazon.de/dp/B0BD39FPRQ?psc=1&ref=ppx_yo2ov_dt_b_product_details Step 1:Glue the lamp to the lamp holder so that the holes are directly above each other.Step 2:You take 6 Led lamps and cut the cable and lead the cable through the hole down to the battery compartment.Step 3: Push the switch into the side of the battery compartment.Step 4:solder one cable from the Led lamps to the switch and the other cable to the battery holder. Finally, connect one cable to the switch and the battery holder.Step 5:Finally, glue the rear panel in place.
Categorie
Decor
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
grote print
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 2/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Min. bedgrootte
200 mm (Groot)
Nabewerking
Lijmen
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie