Ex Libris - Organizer

This organizer is designed to print with a .8 nozzle .4 and .2 will work fine as well. The box is is not overly tight. I've allowed about .5 to 1.0mm play between all the boxes so make sure you have esteps and flow correct. Your printed walls should be 1.6mm thick.

Watch the video real quick to see the tray in action before printing.

https://www.youtube.com/watch?v=XSrWAq1pRbg

Print the following
2x Board Tray
1x Card Tray
1x Component Tray