Exodia Hueforge

Project: Exodia.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Gold Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Blue At layer #7 (0.64mm) swap to Pink At layer #13 (1.12mm) swap to Metallic Gold At layer #14 (1.2mm) swap to Yellow for the rest.