Exoslide Hemera Mount w/ BLTouch

This is an E3D Hemera mount, inspired by Joe Casha's mount for the Ender, Tevo, Etc.

Very solid mount and easy to put together.

V5 makes the BLTouch mount more rigid and lowers it to give about -2.3mm offset for the print nozzle.

Printed w/ 50% infill with 5 wall layers, but I'm sure it would be fine with thinner walls and lower infill. I just wanted to be sure the mount would be stiff.

I did turn supports on for the Hemera mounts. Depending upon your printer, you may not need them. Be sure to set a decent relief from your side walls if printing in PETG.

Parts needed are as follows:

3 X 5mm M3 Button Head Screws
4 X 10-12mm M4 Button Head Screws
3 x Sqare M3 Nuts (Comes w/ Hemera)


EZABL Mount

I added this mount based upon request. Your mileage may vary. Please give me feedback so that I can improve the model if it needs it.

Thanks