Thingiverse
Expansion Card Stand v2
par busiderbaer
153
Téléchargements
129
Likes
4
Makes
Expansion Card holder for PCIe (x1 to x16) and AGP. Works ok for PCI, the cards are not aligned to the others.
Also works for longer x16 cards like graphics cards, though very large ones tip over to the back if the center of mass is behind the end of the PCIe connector (tested on ASUS Strix Vega 64 which does not work)
But its great for storing or displaying your old electronic gems. ;)
Available with two, four, six, eight and ten slots.
The print displayed was botched tough as the corners bent up a bit. So be careful with the larger ones :P
If you have questions or things to improve don't hestitate to ask.
Also works for longer x16 cards like graphics cards, though very large ones tip over to the back if the center of mass is behind the end of the PCIe connector (tested on ASUS Strix Vega 64 which does not work)
But its great for storing or displaying your old electronic gems. ;)
Available with two, four, six, eight and ten slots.
The print displayed was botched tough as the corners bent up a bit. So be careful with the larger ones :P
If you have questions or things to improve don't hestitate to ask.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !